The Avid Armor USV20 Lid Gasket is used to form a seal between the chamber and lid on the USV20 Chamber Vacuum Sealer
- Remove the original gasket by pulling out and paying attention to the original installation.
- Ensuring that the fin is facing outwards, insert the new gasket starting on one corner, pressing the gasket in the channel all the way around.
- Be sure that the gasket is not pushed in or compressed too far into the channel.
- Close the lid and test the sealer by running a complete vacuum and seal cycle.
For how to instructions, watch the tutorial video here: https://youtu.be/7MqEscwHdmc