Seal Bar Replacement - Ultra Series Chamber Sealers

The Avid Armor Chamber Vacuum Sealer Seal bar is used to form a seal on the bag or pouch. The seal bar is a wearable part and should be replaced as needed.

Available compatible vacuum sealers:

• USV1
• USV20
• USVX
• USV32 

Replacement Instructions:

• Remove seal bar by pulling up on seal bar, disconnecting it from gold pins.
• Install new seal bar by pushing seal bar down onto the gold pins into the connector ports on new seal bar.
• DO NOT remove gold teflon tape from seal bar.