Yes, you can use any brand regular vacuum sealer bag in the ES41. We recommend using chamber vacuum pouches as they are much more cost effective than embossed/textured vacuum sealer bags. The largest width that can be sealed is 11" wide.

Yes, the ES41 has an accessory port for vacuum sealing external jars and canisters using an accessory hose. (Sold seperately)

You can SEAL a mylar bag using the adjustable seal time setting. We recommend no more than 7 mil bag to ensure a positive seal.

Vacuum sealing delicate items can be more challenging in the ES41 than when using a traditional vacuum sealer because it does have to pull about a partial vacuum in order to make a seal.

YES! You can seal mason jars that fit in the chamber either standing up or laying on its side. The max size is a quart mason jar.

If your seal bar is not functioning properly or worn or wrinkled condition, we recommend replacing the seal bar to ensure your vacuum sealer is running in prime condition. Please refer to the user manual on how to replace the seal wire and tape on your seal bar.

If your seal bar is not functioning properly or worn or wrinkled condition, we recommend replacing the lid gasket to ensure your vacuum sealer is running in prime condition. Please refer to your user manual for instructions on replacing the gasket.

The ES41 comes with a standard 1 year warranty.

See our warranty policy here.

Yes, we sell replacement seal bar, seal pad and lid gaskets which are considered wearable parts on the ES41. These parts are available here: avidarmor.com/replacement-parts

There could be a number of reasons and can be hard to give you an exact answer as to why there is air left in the bag since there are so many variables when using a chamber sealer.

1. Try expelling any extra air prior to putting bag in the chamber
2. Make sure the opening of the bag isn't' being pinched off during the vacuum cycle. Lay the bag flat across the seal bar with the bottom layer of bag placed underneath the bag clamp and secured in place.
3. Increase your vacuum time
4. Reduce your bag size
5. Add filler to the chamber (small wood cutting board, book, etc.) to occupy more space

There is a lot of trial and error to determine what works best for your application.

It is critical to check your oil regularly and do an oil change if the oil becomes cloudy or discolored. Please watch the video below for instructions on how to change the oil.

Does it seem like your ES41 is no longer getting an adequate vacuum or having another issue? Please submit a Troubleshooting/Repair request. and we will get in touch with you to resolve.

The ES41 Chamber Vacuum Sealer is manufactured in The Netherlands.