Help us, help you! We’d love to offer you an extended2-year warranty on your sealer just for helping us out!

Here’s how:
1. Write an honest product review for your sealer on the site it was purchased, including in-use photos and/or video.
2. Register your sealer here on this form and include an in-use photo and/or video!

That's it!


  1. Plug in power cord.
  2. Locate power cord on back side of sealer, turn ON.
  3. Place filled pouch in the chamber laying open end across seal bar.
  4. Secure pouch by placing bottom layer of pouch into the pouch clamp and securing in place.
  5. Close lid.
  6. Press the 'Auto Vac & Seal' button.
  7. When cycle is complete, open lid.
  8. Inspect your pouch to ensure a tight vacuum and complete seal.
  9. Adjust vacuum & seal time settings as needed for additional bags.


Can I use FoodSaver or other brand bags in the USVX chamber vacuum sealer?

Yes, you can use any brand regular vacuum sealer bag in the USVX. We recommend using chamber vacuum pouches as they are much more cost effective than embossed/textured vacuum sealer bags. The largest width that can be sealed is 10" wide.

How do I vacuum seal liquids in the USVX chamber sealer?

One of the key benefits of a chamber vacuum sealer is being able to seal liquids with ease. Watch the How To video below:

Does the USVX have an accessory port?

Yes! The USVX has an accessory port that allows you to vacuum seal external canisters and jars. To use this function, press and hold the 'Auto Vac & Seal' button for 2 full seconds.

Can you vacuum seal Mylar bags with the USVX?

You can SEAL a mylar bag using the adjustable seal time setting. We recommend no more than 7 mil bag to ensure a positive seal. See the video below:

How do I vacuum seal dry goods in the USVX chamber sealer?

Vacuum sealing dry items is a simple and effective way to keep dry goods such as flour, sugar, corn meal, etc. fresh for long term storage. It is important to always leave plenty of headspace when vacuum sealing dry goods. Watch the video below for more information.

How do I vacuum seal delicate items using the USVX?

Vacuum sealing delicate items can be more challenging in the USVX than when using a traditional vacuum sealer because it does have to pull about a partial vacuum in order to make a seal. Watch the video below for tips on how to accomplish this.

How does the marinating function work?

The marinating feature is a function in which the vacuum sealer will go under a period of vacuum for a 60 second cycle without a seal.We suggest putting your item and marinade in a shallow container (Rubbermaid, glass, etc.) directly into the chamber. Close the lid and start the marinating function. While the chamber is under vacuum, this allows the pores of the meat to open up and infuse the marinade into the meat much faster than a regular marinating process. We recommend repeating the marinating cycle, 3 times.

Can you seal mason jars with the USVX?

YES! You can seal mason jars that fit in the USVX chamber, or by using external accessories. Watch the video below:

How do I change the seal bar on my USVX chamber vacuum sealer?

If your seal bar is not functioning properly or worn or wrinkled condition, we recommend replacing the seal bar to ensure your vacuum sealer is running in prime condition. Watch the tutorial video below:

How do I change the lid gasket on my USVX?

If your seal bar is not functioning properly or worn or wrinkled condition, we recommend replacing the seal bar to ensure your vacuum sealer is running in prime condition. Watch the tutorial video below:

What is the warranty of the USVX?

The USVX comes with a standard 1 year warranty.

See our warranty policy here.

Do you sell replacement parts for the USVX?

Yes, we sell replacement seal bar, seal pad and lid gaskets which are considered wearable parts on the USV32. These parts are available here:

Why is there air left in the bag after vacuum sealing?

There could be a number of reasons and can be hard to give you an exact answer as to why there is air left in the bag since there are so many variables when using a chamber sealer.

  1. Try expelling any extra air prior to putting bag in the chamber
  2. Make sure the opening of the bag isn't' being pinched off during the vacuum cycle. Lay the bag flat across the seal bar with the bottom layer of bag placed underneath the bag clamp and secured in place.
  3. Increase your vacuum time
  4. Reduce your bag size
  5. Add filler to the chamber (small wood cutting board, book, etc.) to occupy more space

There is a lot of trial and error to determine what works best for your application.

What does the E2 error mean?

If you are trying to vacuum seal canisters or other containers using the accessory port on the USVX and you are getting an E2 error, that means that you are not holding down the 'Auto Vac & Seal' button long enough. Press and hold down the 'Auto Vac & Seal' button for a minimum of 2 seconds to start the vacuum from the accessory port.

How do I troubleshoot when my USVX seems like it is not functioning properly?

Does it seem like your USVX is no longer getting an adequate vacuum or having another issue? Please submit a Troubleshooting/Repair request. and we will get in touch with you to resolve.

Where is the USVX manufactured?

Our sealers are manufactured in China. Please know we do stand behind our products in terms of function, quality, and customer satisfaction. We understand if you are in search of products made in the USA, but hope that doesn't deter you from supporting us.

For more FAQ and Troubleshooting Videos, visit our USVX playlist on YouTube

  • The USVX features and accessory port to vacuum seal external canisters.
  • USVX replacement parts, such as the seal bar and lid gasket can be purchased here.